IC Realtime 4 Channel PoE Mobile Network Video Recorder - Manual (Page 118)

109
Figure 6-30 Network
Parameter Function
Remote
host PPPOE Input the user name and password which ISP(Internet service supplier)
provided and chose enable.
Reboot system after configuration is saved and the device will auto connect
to Internet. The IP address is the WAN IP.
There are two conditions for reboot,
1. The user must have the authority to reboot device.
2. There is no user login the system menu on the local end
After PPPOE dial succeed, get the current IP address and visit this IP
address via WEB.
Email
The email interface is shown as in Figure 6-31.
Figure 6-31 Email