Intellijel HexVCA (draft) - Manual (Page 8)

Patch Examples
Example 4 - Voltage Controlled Mixer
In this patch the HexVCA is used as a voltage controlled Mixer. Use the VCA Offset knobs on
the HexVCA to set the initial level of the various inputs. The CV inputs will be added to the
initial level set by the offset knobs. Positive CV will make the signal louder while negative CV
will make the signal quieter. Try tuning the VCOs to different octaves and using clock dividers
to trigger the ADs.
HexVCA Manual v1.0
Page 8 of 9