Panel indicator lights, Trouble beeps – Interlogix Simon XT User Manual User Manual

Page 26

Advertising
background image

20

Simon XT User Manual

Table 9: Siren sounds

Function

Fire

Intrusion

Emergency

Interior and panel
siren*

Temporal 3

Steady

Fast on/off

Interior and panel
siren*

Temporal 3

Steady

Fast on/off

Interior and panel siren Temporal 3

Steady

Fast on/off

Exterior siren

Temporal 3

Steady

* This feature is not verified for use by UL.

Note: Temporal 3 refers to a continuous pattern of three siren pulses, then off for 1.5 seconds,
three siren pulses, then off for 1.5 seconds.

Panel indicator lights

Use Table 10

below

to understand the panel indicator lights.

Table 10: Indicator light

Button

When button light is on

When button flashes

Doors+Windows

Doors and windows armed

Doors and window armed and
no entry delay on

Motions

Motions armed

Motion sensors armed and
latchkey on

Disarm

System disarmed

System subdisarmed

Status

System trouble, open sensor,
or bypassed sensor

System in alarm

OK

There are no open sensors

Chime (solid bell)

Door will cause chime

Special chime (outlined bell)

Motion will cause chime

Light schedules (clock)

Time-activated lights feature
enabled

Sensor lights (light bulb)

Sensor-activated lights feature
enabled

Latchkey on (key)

Latchkey feature enabled

Trouble beeps

Your security system is able to automatically test itself for:

• Power failures
• Low batteries
• Nonworking sensors

Advertising