Philips CCZ194AT - Manual (Page 12)

12 Setting the Clock
There are three ways to set the clock: Manually, with Automatic
PBS Channel Selection, or with Manual PBS Channel Selection.
With manual clock setting, you tell theTV/VCR the current time.
With Automatic or Manual PBS Channel Selection, the TV/VCR
gets the time from your local PBS station. If you use either Manual
PBS Channel Selection or Automatic PBS Channel Selection, follow
the steps on page 19 to have theTV/VCR maintain the clock
according to your Time Zone.
To set the clock manually, follow the steps on pages 12 -13.To set
the clock using Automatic PBS Channel Selection, follow the steps
on pages 14 - IS.To set the clock using Manual PBS Channel
Selection, follow the steps on pages 16 - 17.
Before you begin, make sure:
• TheTV/VCR is hooked up and turned on.
• Channels are set up.
• You make each entry within 60 seconds of the previous entry.
Manual Clock Setting
2-3
I
Press the COMBI button, then press the MENU button.
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
1 PRESS ► 1
V
J
2
Press the PLAY/A button or the STOP/T button to select
PRIM. SETUP. Then, press the F.FWD/^ button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
REMOTE LOCATOR
SELECT AT CHOOSE ►
TO END PRESS EXIT
3
Press the PLAY/A button or the STOP/T button to select
SET CLOCK.Then, press the F.FWD/^ button.
SET CLOCK
> AUTO CLOCK [ON]
SET MANUAL CLOCK
DAYLIGHT SVG.TIME [ON]
SETTIME ZONE
[AUTO]
TO CONTINUE PRESS MENU
SELECT A T CHOOSE ►
TO END PRESS EXIT
Helpftri Hints
Entries that do not match the
TV/VCR’s calendar will cause a
question mark (?) to appear on the
screen.
To make corrections while you are
setting the clock, press the CLEAR
button until the space for the num­
ber you want to correct is flashing.
Then enter the correct number.