Putting batteries in the remote control, Erasure prevention, Vcr maintenance – Philips CCZ194AT User Manual
Page 5: Before using the tvivcr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Before Using the TVIVCR
5
Putting Batteries in the Remote Control
Remove the battery compartment lid on the bottom of
the remote control by pressing in the tab and lifting the
lid.
2
Place three AA batteries inside the battery compartment
with their + and - ends aligned as indicated.
Replace the battery compartment lid.
3
Erasure Prevention
Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.
To prevent accidental erasure, break off the tab with a
screwdriver.
2
To record again, cover the hole with cellophane tape.
Using the Remote Control
s
Press the COMBI button, then point the remote control at the
TV/VCR’s remote sensor when using the remote control to
operate theTV/VCR. Press the CABLE/DBS button, then point
the remote control at the Cable Box/DBS when using the
remote control to operate the Cable Box/DBS.
• Do not put objects between the remote control and the
TV/VCR.
VCR Maintenance
s
In this TV/VCR, use only tapes with the
IVHSI
mark.
*
Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the TV/VCR.
Removable labels like these can jam the TV/VCR.
i Periodic maintenance is required to maintain your TV/VCR’s
excellent performance. This TV/VCR has an automatic head
cleaning system. However, the video heads will eventually require
cleaning or replacement. Cleaning or replacement of the video
heads should be performed by an authorized service center.
2
Helpful H ints
The remote control and its batteries
are supplied.
Do not mix alkaline and man
ganese batteries.
Do not mix old and new batteries.