Plug in thetva^cr, Hooking, Cont’d) 7 – Philips CCZ194AT User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Hooking
Up The TVIVCR
(cont’d) 7
D.
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Details are on page 34.
VCR to the VIDEO Jack on the front of the TV/VCR.
2
Plug in theTVA^CR.
3
Before you turn on the TV/VCR, go to page eight.
Helpful H ints
Before connecting an antenna or cable signal to iheANT(enna) Jack, make sure the pin is not bent If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) jack.
Audio and video cables are not supplied.
Straight Pin
Advertising
This manual is related to the following products: