Cisco GigaStack WS-X3500-XL - Manual (Page 40)

Chapter 2 Installation
Creating Connections
2-8
Catalyst GigaStack Gigabit Interface Converter Hardware Installation Guide
78-6460-04
Figure 2-5 Inserting the Cable in a GigaStack GBIC
Note Always use a GigaStack cable to connect a GigaStack GBIC to any device. For
more information, see the
“GigaStack GBIC Cabling” section on page B-1 .
Creating Connections
You can create these configurations:
• Point-to-point
• Cascaded stack
• Cascaded stack with a redundant link
In a point-to-point configuration or cascaded stack configuration, the GigaStack
GBIC can use the ports listed in
Table 2-1 to connect to other devices.
GBIC module slots
GigaStack cable
SPEED
SYSTEM RPS
STATUS MODE UTIL DUPLX
7
3
22082
5 6
8
4
2 1
1394
1394
1 2 1 2