Philips CCX193AT - Manual (Page 29)

Recording 29
Read and follow the steps below to record aTV program.
Place a tape with its record tab intact (see page five) in
theTV/VCR.The power will come on. Or, if the tape is
already in theTVAfCR, press the POWER button.
Press the (Tape) SPEED button until the desired tape
speed appears on theTV/VCR screen. Detai/s about tape
speed are given below.
Use the CHANNEL Up/Down buttons or the Number
buttons to select the channel to be recorded. (Channels
cannot be changed during recording.)
Press the REC(ord)/OTR button once to start recording.
The REC(ord) light will glow.
o tf there is not a tape in theTVA'^CR, NO CASSETTE flashes on­
screen briefly.
o If the tape does not have a record tab, PROTECTED CASSETTE
/ CANNOT RECORD flashes on-screen briefly.TheTV/VCR will
eject the tape. Replace it with another tape.
To pause the recording (for example, during commer­
cials), press the PAUSE/STILL button. The REC(ord) light will
flash. To resume recording, press the PAUSE/STILL button
again or the REC(ord)/OTR button. The REC(ord) light will
glow.
To stop recording, press the STOP/T button.
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (TI60,TI20, andT60).There are three playback
speeds: SP, LP, and SLP. During playback, theTV/VCR selects the
tape speed automatically.When recording, you can change the
tape speed using the (Tape) SPEED button (see page 22).
Tape Speed Maximum Record/PIaybackTime
1 Type TI60 TI20 T60
SP
(Standard Play)
2hrs.
40 mins.
2 hrs. 1 hr.
LP
(Long Play)
5 hrs.
20 mins.
4 hrs. 2 hrs.
SLP
(Super Long Play)
8 hrs. 6 hrs. 3 hrs.
Heipful Hints
• You cannot record one channel while
watching another.
• Recording options ore on poges 30
-40.
• Vbu connût record if the TV/VCR is
in Record Defeat mode (REC
DEFEATED wiH flash on-screen).
Details are on page 40.
" If you pause a recording for more
than fve minutes, the TV/VCR will
switch to Stop mode automatically
to protect the video cassette tape
from damage.
' You con change the tape speed with
the (Tape) SPEED button while a
recording is in progress, but some
distortion may appear on the tape.