Philips CCX193AT - Manual (Page 37)

Setting Up the VCR Plus* Programming System (confd) 37
Now, compare the channel numbers you have written in the VCR
PLUS+ CH. and CABLE/TV CH. columns.You’ll notice that some
stations have VCR Plus+ and Cable/TV channel numbers that are
the same, and other stations have channel numbers that do not
match. Where the channel numbers DO NOT match, you must tell
theTVA^CR the VCR Plus+ and Cable/TV channel numbers
according to the following steps. i
O Make each entry within 60 seconds of the previous entry.
Press the MENU button to display the pop up menu.
Press the PLAY/A button or the STOP/T button to select
VCR SETUP, then press the F.FWD/+ button.
VCR SETUP
1 ONETIME PLAY [ON]
2 REPEAT PLAY
3 ON-SCREEN MODE
4 RECORD DEFEAT [OFF]
5 VCRPLUS+REF.MAP
TO SELECT PRESS NUMBER
TO END PRESS EXIT
Press the Number 5 button to select VCR PLUS+ RER MAR
VCR PLUS+ CROSS REE MAP
VCRPLUS+ CABLETTV
124
125
01 ---------------^ —
02
03
TO SEUCT CH PRESS CH A/T
THEN ENTER CH NO.
V TO END PRESS EXIT
Look at the lists you filled in on page 36, For stations whose
VCR Plus+ and Cable/TV channels do not match, press
the CHANNEL (Up/Down) buttons until the arrow is
beside the VCR Plus+ channel you need.Then, press the
Number buttons to enter the corresponding Cable/TV
channel from your list. (Enter a “0” before single-digit channels.)
Continue this process until you have entered all the stations on
your list
/CR PLUS+ CROSS REF. MAP \
VCR PLUS+ CABLEfTV
124
(25
01 ---------- ► 23
02
03
TO SELECT CH PRESS CH A/T
TO DELETE PRESS CLEAR
TO END PRESS EXIT
Examine the lists on
page 36.
Press the STATUS/EXIT button to exit
Helpful Hints
• To correct a Cable/TV channel num­
ber, repeat the steps on this page.
• To dear a Cable/TV channel num­
ber, repeat steps 3-5 on this page.
Then, press the CHANNEL
(Up/Down) buttons to select it Then
press the CLEAR button. Press the
STATUS/EXIT button to exit
• Always enter a "0” before single-digit
channels.
• To se/ect line input for the Cafa/e/7V
channel, press 0,0. A/V IN will
appear on-screen.