Cisco OL-15491-01 User Manual
Page 144
A-144
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg radius reauthorization attribute
Otherwise, if intermediate CDRs are supported for the session, the CSG2 sends an intermediate
CDR for each service in the session. However, if you have enabled fixed-format CDRs, the CSG2
does not generate intermediate CDRs during roaming events.
The CDR includes:
–
The Cause TLV, indicating that the CDR was generated due to the receipt of a reauthorization
trigger
–
The saved subset of attributes from the first RADIUS Start message
–
The list of attributes from the new message
For more information about service-level CDR summarization, see the
“Enabling Service-Level
CDR Summarization” section on page 5-10
.
For more information about intermediate CDRs, see the
“Intermediate CDRs” section on page 1-38
.
For more information about fixed-format CDRs, see the
“Configuring Fixed, Variable, or Combined
Format CDR Support” section on page 2-17
.
Examples
The following example illustrates how to create a RADIUS proxy point:
ip csg radius reauthorization attribute 14
ip csg radius reauthorization attribute vsa 7777 44
ip csg radius reauthorization attribute 26 7778 4
Related Commands
Command
Description
Specifies that the CSG2 is to be a proxy for RADIUS messages.