Cisco OL-15491-01 - Manual (Page 33)

A-33
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
entries user idle
• If Connection Duration Billing is enabled, you can use either the billing plan entry idle timer or the
global entry idle timer to release a subscriber connection.
Examples The following example shows how to specify an entry idle time of 1 hour for CSG2 billing plan
REGULAR:
ip csg billing REGULAR
entries user idle 3600
Related Commands Command Description
ip csg billing Defines a CSG2 billing plan, and enters CSG2 billing
configuration mode.
ip csg entries user idle Specifies how long the CSG2 is to retain entries in the CSG2 User
Table.
ip csg radius pod attribute Specifies the RADIUS attributes to be copied from the RADIUS
Start message and sent to the NAS in the PoD message.
ip csg radius pod nas Specifies the NAS port to which the CSG2 is to send the PoD
message, and the key to use in calculating the Authenticator.
ip csg radius pod timeout Specifies the number of times to retry the RADIUS PoD message
if it is not acknowledged by means of an ACK message, and the
interval between retransmissions.
ip csg radius proxy Specifies that the CSG2 is to be a proxy for RADIUS messages.
mode Specifies the mode for a CSG2 billing plan.
service Associates a service with a CSG2 billing plan.