Cisco OL-15491-01 - Manual (Page 71)

A-71
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg entries user idle
• If Connection Duration Billing is enabled, you can use either the billing plan entry idle timer or the
global entry idle timer to release a subscriber connection.
• The idle timer does not affect sticky user entries.
Examples The following example shows how to specify a CSG2 User Table entry idle time of 86,400 seconds:
ip csg entries user idle 86400
Related Commands Command Description
entries user idle Sets the time after which entries for idle subscribers are deleted
from the CSG2 User Table.
ip csg database Server that answers user ID queries.
ip csg entries fragment Defines the maximum number of entries in the CSG2 fragment
database, or how long the CSG2 is to retain the entries.
ip csg entries user max Specifies the maximum number of entries allowed in he CSG2
User Table.
ip csg entries user profile Specifies the location from which the CSG2 is to obtain the
subscriber profile and billing plan when generating entries for the
CSG2 User Table.
ip csg entries session user max Specifies the maximum number of entries allowed in the CSG2
session table.
ip csg psd margin Specifies the maximum number of general packet radio service
(GPRS) tunneling protocol prime (GTP’) messages, beyond the
size of the Billing Mediation Agent (BMA) message queue, that
the CSG2 can buffer for the Cisco Persistent Storage Device
(PSD).
ip csg quota-server messages Specifies the maximum number of general packet radio service
(GPRS) tunneling protocol prime (GTP’) messages that the CSG2
can buffer for all quota servers.