Cisco OL-15491-01 - Manual (Page 106)

A-106
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg quota-server keepalive
ip csg quota-server keepalive
To define the quota server keepalive time interval for the CSG2, use the ip csg quota-server keepalive
command in global configuration mode. To reset the quota server keepalive timer to the default value,
use the no form of this command.
ip csg quota-server keepalive number-of-seconds
no ip csg quota-server keepalive
Syntax Description
Defaults The default value is 60 seconds.
Command Modes Global configuration
Command History
Usage Guidelines We recommend that you change the keepalive time interval only when directed to do so by
Cisco Technical Assistance Center (TAC) engineers. In most environments, the default value is the most
appropriate setting.
Examples The following example shows how to specify a quota server keepalive time of 300 seconds:
ip csg quota-server keepalive 300
Related Commands
number-of-seconds Time, in seconds, between quota server keepalives. The range is 1 to 65535.
The default value is 60.
Release Modification
12.4(11)MD This command was introduced.
Command Description
ip csg bma keepalive Defines the Billing Mediation Agent (BMA) keepalive time interval
for the CSG2.
ip csg ipc keepalive Defines the Interprocessor Communication (IPC) keepalive time
interval for the CSG2.
ip csg psd keepalive Defines the Cisco Persistent Storage Device (PSD) keepalive time
interval for the CSG2.
ip csg quota-server Configures the CSG2 quota servers that return billing quota values
for subscribers.