Cisco OL-15491-01 - Manual (Page 109)

A-109
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg quota-server messages
ip csg quota-server messages
To specify the maximum number of general packet radio service (GPRS) tunneling protocol prime
(GTP’) messages that the CSG2 can buffer for all quota servers, use the ip csg quota-server messages
command in global configuration mode. To restore the default settings, use the no form of this command.
ip csg quota-server messages number
no ip csg quota-server messages
Syntax Description
Defaults The CSG2 buffers up to 10000 GTP’ messages.
Command Modes Global configuration
Command History
Usage Guidelines We recommend that you change the number of GTP’ messages that can be buffered only when directed
to do so by Cisco Technical Assistance Center (TAC) engineers. In most environments, the default value
is the most appropriate setting.
Examples The following example shows how to configure the CSG2 to buffer up to 12345 GTP’ messages:
ip csg quota-server messages 12345
Related Commands
number Maximum number of GTP’ messages that can be buffered for all quota
servers. The range is from 1 to 65535. The default is 10000.
Release Modification
12.4(11)MD This command was introduced.
Command Description
ip csg bma messages Specifies the maximum number of general packet radio service
(GPRS) tunneling protocol prime (GTP’) messages that the CSG2
can buffer for all Billing Mediation Agents (BMAs).
ip csg psd margin Specifies the maximum number of general packet radio service
(GPRS) tunneling protocol prime (GTP’) messages, beyond the size
of the Billing Mediation Agent (BMA) message queue, that the
CSG2 can buffer for the Cisco Persistent Storage Device (PSD).
ip csg quota-server Configures the CSG2 quota servers that return billing quota values
for subscribers.