Ip csg radius start restart session-id – Cisco OL-15491-01 User Manual
Page 145
A-145
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg radius start restart session-id
ip csg radius start restart session-id
To delete an existing CSG2 User Table entry for a specific subscriber, and to create a new entry for that
subscriber, use the ip csg radius start restart session-id command in global configuration mode.
ip csg radius start restart session-id {radius-attribute-number | vsa {vendor-id | 3gpp}
radius-subattribute-number}
Syntax Description
Defaults
The default behavior is that existing CSG2 User Table entries are not deleted.
Command Modes
Global configuration
Command History
Usage Guidelines
This command:
•
Deletes an existing CSG2 User Table entry for a specific subscriber (when a RADIUS Accounting
Start or RADIUS Interim Accounting is received).
•
Creates a new entry for that subscriber (similar to when a RADIUS Accounting Stop has been
received).
•
Terminates all sessions for that subscriber.
To detect duplicate RADIUS requests (in this situation, the existing entry is not deleted), specify the
attribute (which might be a VSA) to be used. If the contents of the specified attribute in the original
request match the contents of the attribute in the current request, the request is a duplicate and the
existing entry is not deleted.
radius-attribute-number
Specifies the RADIUS attribute number. The range is from 1 to 255.
vsa
Specifies the vendor-specific attribute (VSA).
vendor-id
Specifies the vendor ID number. The range is from 1 to 16777215.
3gpp
Specifies the Third Generation Partnership Project (3GPP) vendor ID.
radius-subattribute-number
Specifies the subattribute number. The range is from 1 to 255.
Release
Modification
12.4(11)MD
This command was migrated from CSG1.
Changes from CSG1:
•
The name of this command changed from radius start restart session-id to ip csg
radius start restart session-id.
•
The configuration mode for this command changed from module CSG
configuration to global configuration.
•
The 26 keyword was removed.