Cisco OL-15491-01 - Manual (Page 164)

A-164
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg report wap actual-pdu
ip csg report wap actual-pdu
To specify whether actual protocol data units (PDUs) are to be reported in CSG2 wireless application
protocol (WAP) call detail records (CDRs), use the ip csg report wap actual-pdu command in global
configuration mode. To exclude actual PDUs from WAP CDRs, use the no form of this command.
ip csg report wap actual-pdu
no ip csg report wap actual-pdu
Syntax Description This command has no arguments or keywords.
Defaults Actual PDUs are not reported in WAP CDRs.
Command Modes Global configuration
Command History
Examples The following example shows how to report actual PDUs in WAP CDRs:
ip csg report wap actual-pdu
Related Commands
Release Modification
12.4(11)MD This command was introduced.
Command Description
ip csg report http header Defines the inclusion of multiple HTTP request headers in the CSG2
HTTP_Header call detail record (CDR).
ip csg report radius attribute Specifies the RADIUS attributes to be copied from the RADIUS
Start message into call detail records (CDRs).
ip csg report smtp rfc2822 Specifies that the CSG2 is to include RFC 2822 header
Tag-Length-Values (TLVs) in Simple Mail Transfer Protocol
(SMTP) call detail records (CDRs).
ip csg report usage Enables CSG2 supplemental usage reporting to the quota server.