Ip csg snmp timer – Cisco OL-15491-01 User Manual
Page 168
A-168
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg snmp timer
ip csg snmp timer
To define Simple Network Management Protocol (SNMP) timers for lost CSG2 records, use the ip csg
snmp timer command in global configuration mode. To restore the default setting, use the no form of
this command.
ip csg snmp timer {bma | psd | quota-server} interval
no ip csg snmp timer {bma | psd | quota-server} interval
Syntax Description
Defaults
The default SNMP timer interval is 60 seconds.
Command Modes
Global configuration
Command History
Examples
The following example defines a 300-second CSG2 SNMP BMA timer:
ip csg snmp timer bma 300
Related Commands
bma
Defines an SNMP timer for lost CSG2 Billing Mediation Agent (BMA)
records.
psd
Defines an SNMP timer for lost CSG2 Persistent Storage Device (PSD)
records.
quota-server
Defines an SNMP timer for lost CSG2 quota server records.
interval
Interval, in seconds, of the CSG2 SNMP timer. The range is from
1 to 2,147,483,647. The default is 60.
Release
Modification
12.4(11)MD
This command was migrated from CSG1.
Changes from CSG1:
•
The psd keyword was added.
•
The agent keyword was replaced with the bma keyword.
Command
Description
Enable Simple Network Management Protocol (SNMP)
notification types that are available on the CSG2.