Cisco OL-15491-01 - Manual (Page 205)

A-205
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
mode
mode
To specify the mode for a CSG2 billing plan, use the mode command in CSG2 billing configuration
mode. To use the default mode, use the no form of this command.
mode [postpaid | prepaid]
no mode
Syntax Description
Defaults The default mode is prepaid.
Command Modes CSG2 billing configuration
Command History
Usage Guidelines The mode command with the postpaid keyword is used with both fixed-record format and
variable-record format to enable service correlation of postpaid CDRs.
Examples The following example specifies postpaid mode for CSG2 billing plan REGULAR
ip csg billing REGULAR
mode postpaid
Related Commands
postpaid (Optional) Specifies a postpaid billing plan.
prepaid (Optional) Specifies a prepaid billing plan. This is the default setting.
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1: None.
Command Description
class Specifies a service class value.
entries user idle Sets the time after which entries for idle subscribers are deleted from
the CSG2 User Table.
ip csg billing Defines a CSG2 billing plan, and enters CSG2 billing configuration
mode.
ip csg transport-type assign Classifies data traffic on the basis of its access path.
owner Specifies an identifier or name for a service owner.
ip csg records format Specifies variable or fixed call detail record (CDR) format.
service Associates a service with a CSG2 billing plan.