Cisco OL-15491-01 - Manual (Page 49)

A-49
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
ip csg bma activate
ip csg bma activate
To enable support for multiple active Billing Mediation Agents (BMAs), use the ip csg bma activate
command in CSG2 global configuration mode. To disable support for multiple active BMAs, use the no
form of this command.
ip csg bma activate [number [sticky seconds]]
no ip csg bma activate [number [sticky seconds]]
Syntax Description
Defaults The default value for number is 1.
The default value for seconds is 30.
Command Modes Global configuration
Command History
number (Optional) Number of BMAs that the CSG2 tries to activate at the same
time.
If you have defined more BMAs than number, and an active BMA fails, the
BMA with the highest priority (lowest number) that is not already active is
made active.
The range is from 1 to 32. The default value is 1.
sticky seconds (Optional) Number of seconds of inactivity after which a sticky object is to
be deleted.
The CSG2 creates a sticky object to ensure that all the billing records for a
subscriber are sent to the same BMA. If the user ID is not available (for
example, if the internal table is too small to hold all user ID entries, or if the
CSG2 cannot access the user ID database), the CSG2 creates a sticky object
for the subscriber IP address.
This entry is removed from the table based on inactivity.
Entries that contain a user ID do not age out; they are removed only by
RADIUS messages.
The range is from 1 to 64000. The default value is 30.
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1:
• The name of this command changed from agent activate to ip csg bma
activate.
• The range of the number argument changed from 1 to 10, to 1 to 32.