Cisco OL-15491-01 - Manual (Page 6)

A-6
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
Appendix A CSG2 Command Reference
accounting
accounting
To specify accounting and an optional customer string for a CSG2 policy, use the accounting command
in CSG2 policy configuration mode. To remove accounting for a policy, use the no form of this
command.
accounting [customer-string string]
no accounting [customer-string string]
Syntax Description
Defaults The default is no accounting.
Command Modes CSG2 policy configuration
Command History
Usage Guidelines This command is required if the CSG2 is to generate call detail records (CDRs) for content that matches
the CSG2 policy.
This command is required to enable billing functions (such as CDR generation and prepaid charging) for
content that matches a CSG2 policy.
For FTP and Real Time Streaming Protocol (RTSP) accounting, the CSG2 matches prepaid services on
the basis of the IP address and port number of the control connection to the FTP or RTSP network IP
address.
Examples The following example shows how to specify accounting and customer strings for a CSG2 policy:
ip csg policy MOVIES
accounting customer-string MOVIES
Related Commands
customer-string string (Optional) 1- to 16-byte string to be output to the generated accounting
records.
Release Modification
12.4(11)MD This command was migrated from CSG1.
Changes from CSG1: All keywords and arguments except customer-string string
were removed.
12.4(15)MD Support for FTP was added.
Command Description
ip csg policy Defines a policy for qualifying flows for the CSG2 billing services, and
enters CSG2 policy configuration mode.