Jaypro Sports Jaypro SecureLift Mat Storage System - Manual (Page 10)

© 2006 Jaypro Sports Equipment JSL-Inst002 Rev F3 9-1-2006 10 of 14
Figure 12: LED Indicator Light Designations
Figure 13: Hoist Rotation Gear Pickup - Proximity Switch (Sensor) Location
5. Clearing a System Fault
a. Occasionally the system may experience a critical failure of some component that will
result in an unsafe situation if not corrected. As a safety feature, the control box
program is equipped with fault mode detection and a ‘latched out’ alarm mode. In the
event a fault is detected, the red light on the control box door will be lit and the
operating counters will be zeroed out. Unit will require a reset and steps 12 and 13
above will have to be repeated. Make sure all equipment has not been damaged before
operating system again. The fault light will normally be lit while the unit is in manual
motor mode (MANMS).
Important: It is critically important to understand the cause for the system fault before
proceeding with system startup. Do not proceed unless the system has been deemed completely
safe.