Jaypro Sports Jaypro SecureLift Mat Storage System - Manual (Page 3)

© 2006 Jaypro Sports Equipment JSL-Inst002 Rev F3 9-1-2006 3 of 14
*** Programming ***
The system must not be left in manual mode after programming. Manual mode is
intended solely for installation purposes and does not provide for the level of safety
necessary with the final product.
*** Sensors ***
The proximity switch inside the winch must be adjusted as close as possible to the
gear tooth in order to guarantee accurate rotation counts are maintained. With winch
access panel open so proximity switch LED can be viewed, compare blinking of
LED while winch is being operated with simultaneous gear tooth rotation by looking
through side opening in winch.
Figure 2: Proximity Sensor Viewing Port
Call Jaypro Sports Equipment at 1-800-243-0533 during
regular business hours for technical support.
www.jaypro.com