Jaypro Sports Jaypro SecureLift Mat Storage System - Manual (Page 11)

© 2006 Jaypro Sports Equipment JSL-Inst002 Rev F3 9-1-2006 11 of 14
FAULT
LIGHT
Figure 14: Fault Mode Indicator Light
b. To clear the fault, go to the main menu of the controller as shown above. Activate the
‘alarm reset’ mode by pressing the ENT button and then the arrow keys to display a 3.
Press ENT again to reset fault light. Simply entering this mode will clear the fault from
the system and allow further programming or troubleshooting.
Figure 15: Alarm Reset Mode
Ground all devices per the National Electric Code (NEC).
All wiring to be supplied and installed by a qualified Electrical Contractor.
Wiring to be in accordance with all national and local electrical codes.
This instruction manual should be accompanied by a complete wiring
diagram packet. If the wiring diagrams are missing, or for any other technical
support, please call Jaypro Sports Equipment at 1-800-243-0533 during
regular business hours. All documents and specifications can also be found
on the web at
www.jaypro.com
3 indicates controller is in
Alarm Reset mode.