Jaypro Sports Jaypro SecureLift Mat Storage System - Manual (Page 4)

© 2006 Jaypro Sports Equipment JSL-Inst002 Rev F3 9-1-2006 4 of 14
1. Controller Location and Installation
a. Install the control box within sight of the two hoists. Preferred location is at a midpoint
between the two hoists. Control panel should be a minimum of 12’ off the floor, and in
the case of wall-mounted installations the key switch should be a minimum of 4’ from
the end of the suspended mats.
Figure 3: Control Panel & Key Switch Location
b. Location for control panel should not be within range of rolled mats during the hoisting
operation. Make sure mats will not come in contact with control panel at any point.
c. Do not drill holes with panel in place on wall as debris may become lodged in the
sensitive internal electronic components. Jaypro is not responsible for damage to
equipment incurred as a result of installer carelessness or disregard for these detailed
instructions.
Figure 4: Control Panel Wiring Layout