Cisco 2975 - Manual (Page 16)

1-8
Catalyst 2975 Switch Hardware Installation Guide
OL-17784-01
Chapter 1 Product Overview
Rear Panel
Rear Panel
The switch rear panel in Figure 1-4 has two stack ports, an RJ-45 console port, an RPS connector, and
an AC power connector.
Figure 1-4 Catalyst 2975 Switch Rear Panel
Stack Ports
The Catalyst 2975 switch ships with a 0.5-meter stack cable to connect the stack ports.
Caution Use only approved cables, and connect only to other Catalyst 2975 switches. Equipment might be
damaged if connected to other nonapproved Cisco cables or equipment.
You can order these stack cables from your Cisco sales representative:
• STACK-CAB-50CM-NH= (0.5-meter cable)
• STACK-CAB-1M-NH= (1-meter cable)
• STACK-CAB-3M-NH= (3-meter cable)
Console Port
You can connect the switch to a PC by means of the console port and the supplied RJ-45-to-DB-9 female
cable. If you want to connect the switch console port to a terminal, you need to provide an
RJ-45-to-DB-25 female DTE adapter. You can order a kit (part number ACS-DSBUASYN=) containing
that adapter from Cisco. For console port and adapter pinout information, see the
“Connector and Cable
Specifications” section on page B-1 .
1 Stack ports 4 RPS connector
2 RJ-45 console port 5 AC power connector
3 Fan exhaust
CONSOLE
DC INPUT S FOR RE MOTE POWER S UPPLY SPECIFIE D IN MAN UAL
119772
2
3
4
5
STACK 1
STACK 2
1