Cisco 2975 - Manual (Page 33)

2-15
Catalyst 2975 Switch Hardware Installation Guide
OL-17784-01
Chapter 2 Switch Installation
Installing the Switch
Mounting on a Wall
For the best support of the switch and cables, make sure that the switch is attached securely to wall studs
or to a firmly attached plywood-mounting backboard. Mount the switch with the front panel facing up
(
Figure 2-15 ).
Warning To comply with safety regulations, mount the switches on a wall with the front panel facing up.
Statement 266
Figure 2-15 Mounting on a Wall
When you complete the switch installation, see the “After Switch Installation” section on page 2-16 for
more information on switch configuration.
1 User-supplied screws
272686
Cat aly st 2 975 G Ser ie s Po E-48
1
1