Keri Systems EntraGuard Platinum Quick Start - Manual (Page 26)

EntraGuard
®
Platinum Telephone Entry Controller
Quick Start Guide
Page 26 of 28 P/N: 01969-001 Rev. C
8.5 LCD Setup
The EntraGuard LCD (located on the front of the EntraGuard Platinum controller) is capable of using two different font
sizes. The default is set for the large size. However, if the small size font would be preferred as the default, it may be
changed through the reset menu. From the Reset Menu (see Figure 27 on page 22), press 5 for LCD Setup. The LCD
Setup menu will appear on the LCD (see Figure 34).
Figure 34: Setup LCD Menu
1. Select 5 on the keypad to change the default font size. The Set Font Default Menu appears (see Figure 35).
Figure 35: Set Font Default Menu
2. Press 1 to make the default font small.
3. Press 2 to make the default font large.
NOTE: Users may temporarily change the font size when using the EntraGuard Platinum controller, but any changes
made will always return to the default as selected here.
4. Once the font size is selected a Font set to small/large window appears (see Figure 36).
Figure 36: Font Set