Disconnect from the access control network, Window management – Keri Systems Doors16 User Manual
Page 169
Keri Systems, Inc.
Doors™ Users Guide
01821-001
October 1998
Revision 2.1
Page 169
Figure 161 – Card Identified by the Card Number
Disconnect from the Access Control Network
In order to perform the following functions correctly, the host computer must be actively
connected to the access control network. In the case of modem connections between a host
computer and a remote site, Doors will automatically dial-up the remote site.
•
Auto-Config
•
Card Enrollment
•
Set Time
•
Update Net
•
User Initiated Door Commands
•
Monitor or Event Collection Modes
Doors does not automatically disconnect when these actions are completed. If the connection
between host computer and access control network is made via modem over a distance that
requires a toll call, the connection must be manually disconnected. Otherwise, the resulting
phone bill can be needlessly high.
1.
To disconnect from the access control network, click on the Operate
⇒
Net Disconnect
pull-down menu. The access control network is immediately disconnected from the host
computer.
Window Management
At times an operator might find it necessary or advantageous to have several database
windows open at the same time. There are 5 tools to help in switching between open database
windows.
•
cascade windows
•
tile windows
•
tile windows horizontally
•
arrange icons
•
cycle windows
Cascading Windows
Cascading windows automatically takes all open windows and arranges them, one on top of
another, with the title bars showing for each window.