Get controller status, Get status for all controllers – Keri Systems Doors16 User Manual
Page 45
Advertising
Keri Systems, Inc.
Doors™ Users Guide
01821-001
October 1998
Revision 2.1
Page 45
Get Controller Status
The get controller status command allows an operator to verify that all controllers/doors are
recognized and to verify that the configuration information reported by the controller is
correct.
Get Status For All Controllers
1.
Click on the Setup
⇒
System pull-down menu or click on the
button on the tool
bar.
2.
Click on the Controller Status tab. The Controller Status window appears (see Figure
20).
Figure 20 – Controller Status Window
3.
Click on the
button. All controllers are polled for their configuration and status,
and this information is entered into the Controller Status spreadsheet (see Figure 21).
Advertising