Kurgo Extended Bench Seat Cover - Manual

Installation & Care
8.14 For more information: 877.847.3868 :: www.kurgo.com :: [email protected]
Underside details
are shown as
dashed lines
extended
Figure 1
Push top of Cord
Lock (E) down
and pull Cord (C)
to tighten.
Become a fan of Kurgo on
Facebook and receive all the latest
updates, giveaways and contests.
Our product cleaning instructions will help ensure that your gear has a long, exciting life. In general, washing by hand and hang air-drying is the
best way to care for your Kurgo products. However, for the occasions when the mess is too great and time is too tight, we recommend using
a washing machine.
Hand Wash Instructions
Note: Recommended for small messes.
1. Brush off loose dirt with a dry brush.
2. Spot clean with a damp sponge, cold water, and mild soap.
Avoid harsh detergents.
3. If necessary, rinse larger area to eliminate excess soap residue.
4. Hang to air dry (do not machine dry).
Machine Wash Instructions
Note: Only machine wash gentle in front-loading units (DO NOT use machine with
an agitator as it could cause damage not covered under the Kurgo Warranty)
1. Secure all buckles and hardware.
2. Wash with cold water and mild soap. Avoid harsh detergents.
3. Rinse thoroughly to eliminate soap residue.
4. Hang to air dry (do not machine dry).
Cleaning Instructions
Installation:
1) Clip adjustable straps (A)
around your seat head
rests so that the cover
aligns itself with your
vehicle’s seat.
2) OPTIONAL: There is an
optional back strap (B)
that attaches around the
back of your seat, clipping
together in the back. This
is for extra fitting support
in vehicles where the seat
folds down.
3) The under-seat elastic
cord (C) simply slips
through triangle (D) and
attaches through the left
and right cord locks (E).
Pull straight across,
leaving no slack; tuck
excess bungee under the
edge of the seat.
4) Use the extra storage
pockets (F) for anything
you like! We suggest lots
of fun dog stuff.