Kurgo Cargo Cape - Manual

Installation & care
Installation:
1) Align and then attach the
two headrest (A) straps around
the back of your vehicle’s rear
seat head rests. Adjust so
product is flush with seats and
your vehicles cargo area.
2) Once product is aligned,
press down on Velcro points (G)
to secure the cape. Be aware the
Velcro is an added feature, and will
only attach to certain seat fabric and
flooring. We have also included extra
adhesive to be used if needed.
3) The bumper flap (E) is optional
and can be secured under the Kurgo
label located at the tailgate of your
vehicle for on-and-off use. Here you will
also find and extra flap that can be
placed underneath your vehicles floor
mat for extra stability.
4) The zipper feature (B) allows you
to simply unzip for up and down seat
movement, without having to remove
the entire Cargo Cape.
1.12 For more information: 877.847.3868 :: www.kurgo.com :: [email protected]
Washing instructions:
• Brush off loose dirt with a dry brush.
• As needed, wipe off with a damp sponge and mild soap.
• Rinse only, if possible. Use cold water and a sponge or rinse in a tub without soap.
• Machine wash in front-loading unit (DO NOT use machine with agitator, agitator could cause damage not covered
under warranty) with cold water and mild soap (Ivory Flakes, Woolite, Sport Wash, Etc.) No detergents.
• Rinse thoroughly to eliminate soap residue.
• Lay flat to dry.
Bumper guard fastened
Bumper guard open
PARTS LIST & KEY
A headrest straps
B split seat zipper
C bumper guard flap
D mesh pocket
E bumper guard
F raised rim/water trap
G velcro stabilizers
H anchor flap
dashed line signifies items on back of cape
Become a fan of Kurgo on
Facebook so you can
receive all the latest updates,
giveaways and contests.