Kurgo Stowe Booster Seat User Manual

Installation & care

Advertising
background image

NOTICE: Please contact Kurgo directly with

any product or return inquiries.

[email protected] • 877-847-3868

Washing instructions:

• Brush off loose dirt with a dry brush.
• As needed, wipe off with a damp sponge and mild soap.
Liner is machine washable, hang to dry.

For more information:

877.847.3868 :: www.kurgo.com :: [email protected]

6-12

WARNING: After clipping the tether strap to a dog harness, adjust the length of the strap

to keep dog from jumping out. Always use a harness with the booster seat, collars are not

suitable for automotive restraint. Never leave a dog unattended in the vehicle.

Installation & Care

BASIC SETUP

1.

Locate the Kurgo logo at the front of the booster seat, un-Velcro

2.

Lift up the rectangular support brace (E) and clip the small surrounding

straps together to keep the brace in place. Re-attach the liner and follow

below for further vehicle installation.

INSTALLATION IN VEHICLE:

1.

Buckle the seat belt where the booster seat will be installed.

Loop over the top of the headrest. Use the Strap Adjuster (B) to select

a suitable height for your Booster Seat.

2.

Wrap Seat back Strap (C) around the back of the seat and clip buckles

3.

attached you are ready to roll.

INSTALLATION IN VEHICLE WITHOUT HEADREST:

1.

Buckle the seat belt where the booster seat will be installed.

Loop over the top of the seat. Extend the length of the Headrest Strap

(A) so the bottom of Booster rests on seat.

2.

Wrap Seat back Strap (C) around the back of the seat and clip buckles

3.

attached you are ready to roll.

A

B

D

Check with vehicle maunfacturer for air bag guidelines.

A

B

C

A
B

D

Headrest Strap Adjuster

Headrest Strap

Seat Back Strap
Harness Tether
Support Brace

KEY

C

E

E

USING THE TETHER WITH YOUR VEHICLE’S SEAT BELT

1.

Remove carabiner (C) an loop tether around the seatbelt (A) and pull back through tether handle.

2.

Pull strap through slide (B) located in the back of the Booster Seat.

3.

Re-attach carabiner (C) to strap and attach to Harness leash hook.

A

B

C

C

Advertising