Kurgo Portsmouth Booster Seat - Manual

USING THE TETHER WITH YOUR VEHICLE’S SEAT BELT
1. Remove Carabiner (C) and loop Tether around the seatbelt (A) and pull back through Tether handle.
2. Pull tether through slide (B) located in the back of the booster Seat.
3. Re-attach Carabiner (C) to strap and attach to Harness leash hook.
WARNING: After clipping the tether strap to a dog harness, adjust the length of the strap
to keep dog from jumping out. Always use a harness with the booster seat; collars are not
suitable for automotive restraint. Never leave a dog unattended in the vehicle.
FIG. 3
1 2 3
A
B
Check with vehicle manufacturer for air bag guidelines.
A
C
A
B
D
Headrest Strap Adjuster
Headrest Strap
Seat Back Strap
Harness Tether
Support Brace
KEY
E INSTALLATION IN VEHICLE:
1. Buckle the seat belt where the booster seat will be
installed. Loop Headrest Strap (A) over headrest.
Use the Strap Adjuster (B) to select a suitable height
for your booster seat.
2. Wrap Seat Back Strap (C) around the back of the seat
and clip buckles together. Pull strap to tighten. (fig 2)
3. To secure Tether (D), follow the instructions below
in fig 3. Once Fido is attached you are ready to roll.
D
C
WASHING INSTRUCTIONS:
• Brush off loose dirt with a dry brush.
• As needed, wipe off with a damp sponge and mild soap.
• Liner and pad are machine washable; hang to dry.
Become a fan on Facebook to receive
our updates, giveaways & contest info.
NOTICE: Thank you for your recent Kurgo purchase. If you have any questions or concerns please contact us directly before you contact the retailer; we are great
problem solvers. We hope that you will be happy with your purchase and will think of Kurgo next time you travel with your dog.
877-847-3868 / [email protected]
C
FIG. 2
FIG. 1
9.12 For more information: 877.847.3868 :: www.kurgo.com :: [email protected]
BOOSTER
SEAT
Installation & care
B