Kurgo Co-Pilot Seat Cover User Manual

Bucket seat cover, Installation & care, Instructions

Advertising
background image

Instructions:

1. Pull the seat cover over the top of the seat

and adjust accordingly for a smooth fit.

2. Slide the seat flap through where the back

of the seat and bottom of the seat meet.

3. Fit the bottom of the seat cover over

the bottom of the seat.

4. Pull the seat flap tightly in place and hook

the two elastic straps onto the flap.

Care:

Spot clean with mild solution of soap and water. Machine wash in front-loading machine when needed. Air dry.

CAUTION:

This cover should not be used in vehicles equipped with side air bags or on seats with integrated air bags. Check with your
vehicle manufacturer for details. Use of this seat cover may interfere with deployment of side air bags.

Installation & care

Become a fan on Facebook to receive

our updates, giveaways & contest info.

NOTICE: Thank

you for your recent Kurgo purchase. If you have any questions or concerns please contact us directly before you contact the retailer; we are great

problem solvers. We hope that you will be happy with your purchase and will think of Kurgo next time you travel with your dog.

877-847-3868 / [email protected]

BUCKET SEAT

COVER

back of seat

Optional:

The seat cover may gradually ride up around
the corners of the seat. To prevent this,
the straps located at the front and back of the
underside of the seat cover clip together under
the seat as shown in the diagram to the right.
Clip the straps together and take up the slack
by adjusting the rear strap.

Pull to take up slack
and adjust underseat
strap tension.

View showing strap assembly
underneath the bucket seat.

See the complete Dog Travel line at www.kurgo.com

9.12

For more information:

877.847.3868 :: www.kurgo.com :: [email protected]

Advertising