LAARS Gateway LER - Manual - Manual (Page 14)

LAARS Heating Systems Page 14
LAARS Gateway Startup Guide Page 14 of 32
LAARS Heating Systems Company, 20 Industrial Way, Rochester, NH 03867 USA
Web: www.laars.com Toll Free: (800) 900-9276
4.2 Use the Gateway Web GUI to Connect to the Gateway
 Open PC web browser and enter the default IP address of the Gateway 192.168.1.24 to determine if the
Gateway is up and communicating.
Figure 8: FST Web GUI screen
4.3 Set IP Address for BACnet/IP or Modbus TCP
 Open a PC web browser, enter the default IP address of the Gateway 192.168.1.24 and connect to the
Gateway.
 From the GUI main home page, click on setup and then Network Settings to enter the Edit IP Address
Settings menu.
 Modify the IP address (N1 IP address field) of the Gateway Ethernet port.
 Type in a new IP address in the format xxx.xxx.xxx.xxx
 If necessary, change the Netmask (N1 Netmask field).
 Type in a new Subnet Mask
 If necessary, change the IP Gateway (Default Gateway field)
 Type in a new IP Gateway
 Note: If the Gateway is connected to a router, the IP Gateway of the Gateway should be set to the IP
address of the router that it is connected to
 Click on Update IP Settings button. This will save IP address and reset the Gateway.
 Unplug Ethernet cable from PC and connect it to the network hub or router