LABEC GW1060 User Manual
Page 24
Rev. 00
GW2045 – GW1060 Manual
Pag. 23 di 43
6.5. PREPARATION
OF
LOAD
FOR
THE
WASHING
AND
DISINFECTING
PHASE
A efficient wash begins with the preparation of the glassware to be treated.
Before placing the glassware and the instruments in the specific baskets, it is
necessary to remove any large residue deriving from previous use, by soaking,
treatment or simply rinsing.
Stainless steel instruments cannot be immerged in physiological solutions of sodium chloride, as prolonged
contact causes corrosion and damage to the surface due to stress corrosion cracking.
Do not overload the wash baskets in order to obtain a suitable mechanical action of water on all glassware
surfaces.
Glassware must be placed correctly on suitable wash supports in the machine, in order to achieve efficient
cleaning and to avoid damage to the objects being treated.
Instruments that can be disassembled must be put away according to the instructions provided by the
manufacturer.
Check that there are no labels on the glassware to be washed that may be detached during the process.
Avoid direct and repeated contact with dirty instruments as much as possible.
Always use extreme caution. Use all the individual protective devices available for
this type of operation, before and after treatment.