LABEC GW1060 - Manual (Page 26)

Rev. 00 GW2045 – GW1060 Manual Pag. 25 di 43
KEY TO PROGRAMMES AND DEFAULT DOSE TABLE
SYMBOL DESCRIPTION
P1, P2, P3 Peristaltic pumps
DD: Detergent measuring device
N.C. Heating not controlled
COMPONENT STANDARD DOSE
P1/DD 5ml/litre
P2. 4ml/litre
P3 9ml/litre
WATER INLET GW2045 GW1060
STANDARD PHASE 5 litres 9 litres
WASH AND NEUTRALISATION PHASE 4 litres 6 litres
DEMINERALISED WATER RINSE 5 litres 9 litres
NOTE
If the demineralised water attachment has not been selected, the phase is
replaced by one using cold water.
Approximate times
programmes 1 to 8: About 10 mins, programmes 2, 3, 4, 5, 6, 7: About 1 hour
The given times are approximate and related to the three-phase 400V version.
PERSONALISABLE PROGRAMMES 6 AND 7
Programmes 6 and 7, CUSTOM 1 and CUSTOM 2 respectively, can be personalised
by authorised SMEG technicians, on the customer’s request.
By default, programme 6 corresponds to “thermal disinfection at 93°C for 3’ ”.
By default, programme 7 corresponds to “thermal disinfection at 93°C for 10’ with a
prewash”.
Keep track of the specifications for any personalised programmes, using the
blank table given below.