LABEC GW1060 - Manual (Page 43)

Rev. 00 GW2045 – GW1060 Manual Pag. 42 di 43
IMPORTANT
Repairs to the appliance by unauthorized personnel are not covered by the warranty and
are at the user’s charge.
10. INSTALLATION DIAGRAM GW2045 – GW1060
For detailed specifications and electricity connection, see paragraph "INSTALLATION".
Note: Water connections can also be prepared on the left side of the machine, bearing in mind the maximum
distance indicated on the product, “H”. The internal diameter of the outlet pipe must be at least 40 mm. See
the paragraph INSTALLATION for further details.
The non-pressurised DEMINERALISED WATER TANK is an optional accessory. It can be
prepared if there is no pressurised demineralised water in the system (it is considered as
pressurised when it is: 2bar < p_demi < 5bar). The tank must be positioned correctly and
used together with the PAD accessory.
MACHINE SIZE [mm]
Model GW2045 GW1060
A 620 670
B 600 600
E 450 600
F 30 30
G 850 850
OUTLET WATER CONNECTIONS [mm]
I max 500
H 400 ≤ H ≤ 800
OPTIONAL DEMINERALISED WATER
TANK [mm]
L 1000 ≤ L ≤ 1200
DISTANCE FROM WALL [mm]
M M ≥ 10
Key
"d" – drain – machine outlet.
"cw" – cold water (tap water) – cold water inlet.
"dw" – demi water – demineralised water inlet.
.