System and safety information, Prior to operation, Touch pad diagram – Lippert Components Ground Control 3.0 Aftermarket User Manual
Page 9: Aftermarket manual
Ground Control
™
3.0
Aftermarket Manual
www.lippertcomponents.com (574) 537-8900
Rev: 12.01 - Ground Control™ 3.0 Aftermarket Manual
9
System and Safety Information
Failure to act in accordance with the following
may result in death or serious personal injury. The
use of the Ground Control 3.0 leveling system to
support the unit for any reason other than which it
is intended is prohibited by Lippert’s limited war-
ranty. The Lippert leveling system is designed as
a “leveling” system only and should not be used
to provide service for any reason under the coach
such as changing tires or servicing the leveling
system. Any attempts to change tires or per-
form other service while unit is supported by the
Ground Control 3.0 leveling system could result
in damage to the 5th wheel and/or cause death or
serious injury.
Be sure to park the unit on solid, level ground.
Clear all jack landing locations of debris and
obstructions. Locations should also be free of
depressions. When parking the unit on extremely
soft surfaces, utilize load distribution pads un-
der each jack. People and pets should be clear of
coach while operating leveling system. Never lift
the unit completely off the ground. Lifting the unit
so the wheels are not touching the ground will
create an unstable and unsafe condition.
Prior to Operation
The leveling system should only be operated under the
following conditions:
1. The unit is parked on a reasonably level surface.
2. Be sure all persons, pets, and property are clear of the
coach while the leveling system is in operation.
3. Make sure battery(ies) are fully charged and test at
12+VDC under load.
A
B
C
D
E
F
K
G
H
I
J
Fig. 16
Letter Description
A
Up Arrow - Scrolls up through menu on LCD
B
Down Arrow - Scrolls down through menu on LCD
C
Enter - Activates modes and procedures on LCD
D
Retract - Places system into retract mode
E
LCD Display - Displays procedures and results
F
Auto Level - Places system into auto level mode
G
Front Button - Activates both front jacks
H
Left Button - Activates left jack(s)
I
Right Button - Activates right jack(s)
J
Rear Button - Activates both rear jacks
K
Power Button - Turns system on and off
Touch Pad Diagram