New England Arbors VA68111 - Manual (Page 2)

S T E P O N E
2
Slide post caps into position as illustrated. Push firmly until the
arches bottom out inside the post caps.
Join arches together as illustrated.
Fasten 4 screws in post cap at top of arch as illustrated (Fig 1),
and repeat for other arch. Fasten 2 screws in top portion of post
caps at bottom of arch (Fig. 2), and repeat for other arch.
Insert arch rafters (6) into the holes on the arches until they
bottom out inside the arches. There are “locking tabs” located at
each end of the rafters that once inserted into the holes will
lock into place.
The Athens Arbor
Assemble the Arch System
3
2
3
Lay out the side panel horizontal top and bottom rails and three of
the side panel vertical spindles. Push the horizontal top and bottom
rails down over the verticals to lock into place.
Lay out the one post with holes facing sideways, and insert the top
and bottom horizontal rails as illustrated.
(Continued on following page...)
1
2
S T E P T W O
Assemble the Side Panels
1 2
1
PLEASE NOTE:
All of the horizontal rails, spindles and arch rafters have
locking tabs located at both ends. Once inserted and pushed
into the routered holes, they will lock into place permanently.
4
1
2
4
Fig. 1
Fig. 2