New England Arbors VA68103 - Manual (Page 3)

S T E P T W O
3
Lay out one of the posts with the holes facing upwards.
Fit the side panel horizontal rails over both ends of the lattice.
Insert the side panel horizontal rails and lattice into the posts.
Flip the post and lattice over and insert the rails and lattice into
the opposite post.
Secure horizontal rails into the posts using long 3” scews.
Repeat for other side panel.
1
The Livingston Arbor
Assemble the Side Panels
2
3
4
5
6
1
Insert the assembled arch into the top of all four posts
until the arch bottoms rest on top of the "stopper" bolts.
You will need a helper.
Pull the post caps down into final position over the posts
and fasten the arch system to the posts by installing 2 short
( 1 1/2 in. / 3.8 cm.) screws per post as illustrated.
1
Connect Arch System to Side Panels
1
2
2
S T E P T H R E E
www.edenarbors.com
1
* Bottom
of Arch
2
4 3
5