New England Arbors VA68102 - Manual (Page 2)

S T E P O N E
2
Layout one arch and insert the five arch rafters as illustrated.
Holding the opposite arch, guide the arch rafters into the routed
holes as illustrated.
Fasten the arches to the top rafter using 1 1/4 in (3.17cm.) screws
as illustrated.
The London Arbor
Assemble the Arch System
3
2
3
Layout the Side Panel Bottom Horizontal Rail and insert the Middle
STRAIGHT Vertical Spindle (slightly shorter than the two outer
vertical spindles that will be bent into place).
Insert the two vertical spindles that will be BENT into place
(slightly longer than middle vertical spindle).
Slide the Side Panel Middle Horizontal Rail over the three vertical
spindles to about the middle of the vertical spindles.
Position the Side Panel Top Horizontal Rail and insert the Middle
Vertical Spindle.
Tension bend into place the two outer vertical spindles. The
assembled side panel will need to be held together until it is
inserted into the post.
(Continued on following page...)
1
2
S T E P T W O
Assemble the Side Panels
1
1
2
1 2 3
4 5
3
4
5
PLEASE NOTE:
Arch rafters have locking tabs located at both ends. Once
inserted and pushed into the routered holes they will lock
into place permanently.