New England Arbors VA68102 - Manual (Page 3)

S T E P T H R E E
3
Set out one side panel ensuring that holes at the bottom of the
posts face outwards. Insert the assembled arch through the holes
at the top of the posts.
Do the same for the other side panel. You will need a helper.
Adjust the opening to 42 in. (106.7cm) between the posts (arbor
allows for minor variance if you desire a smaller or larger opening).
Fasten the arch system to the posts by installing four screws as
illustrated at each post.
Place post caps on top of posts.
The London Arbor
Connect Arch System to Side Panels
www.edenarbors.com
6
7
8
9
Layout one LEFT post (as identified) horizontally with holes facing
up and insert the assembled side panel by aligning the horizontal
rails with the holes on the post.
Layout one RIGHT post (as identified) horizontally with holes
facing up and insert the assembled side panel and post into.
Fasten the side panel to the posts by using 1 1/4 in (3.17cm.) screws
into the posts as illustrated. Ensure that all horizontal rails on
side panel “bottom out” inside the posts prior to screwing together.
Repeat as necessary for other side panel.
1
2
3
6
4
5
7
8
2 1
4
3 5
42 in.
106 3/4 cm.