Vinyl beam assembly, Vinyl rafter assembly, 10 x 10 flat top louvered pergola – New England Arbors VA42062 User Manual
Page 11
Advertising
11
10 x 10 Flat Top louvered Pergola
Vinyl Beam Assembly
Using four 1 1/2” screws provided, fasten the Beam Joiners,
Beams and Wood together as shown.
Now that the wood is secured in place, use the predrilled holes
as templates and drill 1/2” holes through the wood as shown.
Make sure to drill straight through to the other side of the beam.
Repeat for all four beams.
3
4
5
www.newenglandarbors.com
3
4
Vinyl Rafter Assembly
1
S T E P F I V E
To accomodate the notches on the rafters, first the wood inserts
must be notched out as shown below:
Six will be needed.
✁
✂
✄
☎
✁
✂
✆
✝
✞
✁
✂
✟
✠
✡
✁
✂
✝
✞
✁
✂
✁
✂
✄
☎
✁
✂
✆
Advertising