New England Arbors VA42011 - Manual (Page 11)

Vinyl Beam Placement
11 10 x 10 Arch Top Pergola
1
Temporarily clamp or place the inside main support beam into
position. Align pre-drilled holes in the beam with the pre-drilled
holes on the post.
Position the outside main support beam (beam with rafter
brackets goes on the outside), aligning pre-drilled holes in
the beam with the pre-drilled holes on the post.
Insert the aluminium bushings provided into the pre-drilled holes.
Insert galvanized carriage bolts and fasten washers and nuts.
Install four 2 1/2 inch screws in a square shape around the bolt
on both sides of the beam.
1
2
3
S T E P S I X
2
3
4
4
www.edenarbors.com
5
5