New England Arbors VA42011 - Manual (Page 12)

Rafter Assembly
12 10 x 10 Arch top Pergola
1
Insert one side of the arched vinyl rafters into joiners. Push firmly
until the extrusion bottoms out inside the joiner.
Insert the short steel stiffeners. Position so it centers itself in
relation to the joiner.
Insert the opposite arched vinyl rafters into joiners. Push firmly
until the extrusion bottoms out inside the joiner.
Screw the joiner to the vinyl rafters by using 1 1/2” screws.
Repeat so you have 6 completed rafters.
1
2
3
S T E P S E V E N
4
2
3
4
www.edenarbors.com
5