OmniSistem Das Light - Manual (Page 15)

- User manual - Manuel d’utilisateur - Manual del usuario -
15
Fade time and wait time
• Fade-time corresponds to time of transfer between the previous step
and the next step. Motion speed depends on fade-time.
• Wait time is located at the end of each step. It corresponds to how long
a step is kept on and break-time at the end of each step.
Time accuracy is 4/100 sec. Values are displayed in the text-area at the top
of the dialog-box. By clicking on the arrows at the top right-hand corner, you
can modify time-settings:
• Rightward arrows correspond to tenths and hundredths of seconds.
• Middle-arrows correspond to seconds.
• Leftward arrows correspond to minutes.
A time-setting can be assigned to the following steps:
• Current step is the step selected or the first step you have selected.
• Selected steps are all the steps selected previously.
• All steps, all the steps present in the scene.
Cycle-creation (sequences)
A cycle is a set of scenes played non-stop in sequence. It enables the user to
play several scenes without having to trigger them off manually.
Each scene can retrieve or follow a selected scene, thus allowing sequences
in any order. For instance, you may wish to always retrieve the same scene at
the end of your cycles.