OmniSistem Das Light - Manual (Page 32)

- User manual - Manuel d’utilisateur - Manual del usuario -
32
In the movement area, a prompt indicates the fixture position:
• Right-click in the movement area to move your fixture from its current
position.
• Left-click in the movement area to move your fixture on
the mouse
position.
• Keep the mouse clicked to hold the movement.
• Lock, the mouse button is auto-held when moving. Click again to unlock
the button.
• Unlock, you can act on Pan & Tilt simultaneously.
• Lock Pan, the prompt movement works on Tilt only.
• Lock Tilt, the prompt movement works on Pan only.
• Center,
to center your fixtures.
• Precision, to select accuracy of motion speed.
The “Lock” checkbox is saved on closing the window.
Geometrical figure creation
Thanks to fixture movement, this software can easily create geometrical
figures. Each figure is created step by step, your screen or the movement
area is used as a drawing area and you mouse as a pen-device. The mouse
fixes the major points of the figures being drawn on the screen or in the
movement area.
If you want your light to rotate around 8 points:
• Create a new scene and select the first step.
• Choose the original position of the circle or figure.
• Create a new step (CTRL + A) or select the next step.
• Choose the second position of the circle or figure.
• Create a new step (CTRL + A) or select the next step.
• Repeat to the eighth step or the last step and select fade times.
Triangle (3 steps, 3 points),
Square (4 steps, 4 points),
Star (10 steps, 10 points),
Sun (16 steps, 16 points),
and so forth…
This method works both with Pan & Tilt shortcuts and Pan & Tilt
window (Left click).