OmniSistem Das Light - Manual (Page 34)

- User manual - Manuel d’utilisateur - Manual del usuario -
34
• By keeping the button pressed, you can adjust track-level.
• Click on the arrow at the top and at the bottom of a pitch to modify a
channel value more accurately.
• Use mouse scrolling (+ 10 or - 10 DMX).
• Select your channel and use + or - keyboard keys for maximum
accuracy.
Shortcut-key method
In the Setup page, you can assign a keyboard key to a fixture or a channel to
have direct access.
• Keep the key pressed and move the mouse.
• When the key is released, the level required is assigned.
One single key can control a set of channels simultaneously.
Preset-method
A Preset is a preset DMX level that corresponds to any value between 0 and
255 and to a specific light-effect (e.g. gobos, colors…). Presets are available
from SSL libraries. Each preset is programmed from ScanLibrary.
Presets are permanently available from the
cursor-window.
• Right-click on the channel icon (top of a
cursor) to display a descriptive window
showing the presets available.
• Left-click to select the preset. The level is
directly set.
The Preset window displays the following
information:
• Preset-icon
• Preset DMX value
• Preset-name
To use the preset method, your libraries have to be perfect. Read
the technical features of your fixtures to configure your libraries.
The RGB, CMY and Pan & Tilt channels have their own preset in
active window form.