Creating an effect, Editing an effect content – OmniSistem Das Light User Manual

Page 20

Advertising
background image

- User manual - Manuel d’utilisateur - Manual del usuario -

20

Creating an effect

Click on New to
display a dialog-box.

• Include live faders, the channels in HTP & LTP manual mode are

included in the effect.

• Include effect, select the effect required from Effect list.

• Name, you can name the new effect.

• OK, the effect is created and edited; a new cursor-box is displayed at

the bottom of your screen.

• OK + Option, the effect required is now created and a dialog-box is

displayed to control its advanced options.

Editing an effect content

After clicking on Edit, a dialog-box prompts
you to select an effect available from the list.

Click on OK then a new cursor-window
appears at the bottom of your screen.

By default all the channels are on OFF, but
you can change all the channel-DMX levels
into HTP then LTP mode, by just clicking
once again.

When the new cursor-window appears, all channels are in OFF mode. Click
on the OFF button to switch a channel into LTP. Choose the DMX value with
the cursor or the presets. Repeat this procedure on all the other channels
required.

Keep a group key pressed and select a DMX level to copy level
and state into the other channel fixtures in the group.

Advertising